Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 03:38

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

He then asserts :

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

What would it take for you to consider yourself a "Swiftie" like Flavor Flav?

There are two important concepts here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This is where the MOV conducts again, and dissipated the energy.

What could a Google ‘Pixel Flip’ do better than the Motorola Razr? - 9to5Google

It seems Mohan does not understand the difference between a comment and an Answer.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

What does a fuse do?

Titan's Atmosphere 'Wobbles Like a Gyroscope' – And No One Knows Why - ScienceAlert

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

But… the neutral is now “floating” because of the 1 ohm resistance.

Is it painful for men to wear bras, panties, and tampons?

Upvotes:

2024–10–10[John johnson John Johnson ]

but I think this circuit , shows a few more pieces.

Powerful solar telescope unveils ultra-fine magnetic 'curtains' on the sun's surface - Space

These devices are installed between the “hot” and “neutral” and protective ground.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

First Sentence:

How old is planet Earth? Is it 4.5 billion years old or 6,000 years old?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

This device then solves the entire problem.

2024–10–14 [Omar Gharbi Omar Gharbi ]

I caught my neighbor leaving his 12-year-old son home alone and he has not come back in 6 hours. Should I call CPS?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The bolt then partially travels down the line to your home.

a photo is worth a thousand words.

What do men find attractive in an older woman?

2024–10–16 [ OO OLAOYE OYEBODE ]

But it can get overloaded, and no longer works.

This is 'the assistant's answer'

I’ve Figured Out a Method for Keeping My Son’s Favorite Toy Clean. It Might Lead to Some Trust Issues. - Slate Magazine

The third is lightning and “how it gets conducted into a home.”

eight

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Riddle: How do budget cuts, DEI hires, and empty reservoirs, turn the bluest, most Democrat city Red?

(Dc diagram shown, AC is similar).

I post the exact comment here.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

RFK Jr. Is Opening the Alternative Medicine Floodgates - Gizmodo

so, what happens?

For this case there are devices called Metal oxide varistors (MOV).

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What are some funny stories of people calling 911 for non-emergencies?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

the problem then depends on "how fast does the fuse operate?".

Now when you have a certain ac resistance, then a current flows in a loop.

He then describes the function of a fuse.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

In schematic diagrams this is the symbol for a fuse:

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

An AC voltage/ current source, and an ac inductive load.

A circuit breaker is similar, but is resettable.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Because the load is inductive, the current lags the voltage.(by a bit).

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Barnstars:

The other is “what does a “fuse” do?”

[image of Common-mode choke]

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

nine

[old diagram got deleted by accident]

Here is a simplified AC power diagram.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This one hit behind the barn.

The MOV will conduct when the voltage exceeds 50% of line voltage.

One is “what exactly is in a ‘surge protector’ ? ”

So, the voltage could go up to 500 volts, and the fuse will not open up.

At one ohm, the resistor has a maximum of 1 watt power.

It also is a device that limits the change in current flow.

At least they know the answer if they wanted it.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Edit 2024–10.

what exactly is a ‘surge’ protector?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There are three different concepts here that are getting confused.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

What is lightning?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

but this device (an Inductor) … impedes the rapid changes in the current.

He then describes Rainy Season and Lightning.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

A fuse is a non-resetable over current circuit protector.

These are simplified answers to the original question, and does not change anything I wrote above.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

One